WaveShare GameHat 3D Printable Case STL's

These are the STL's for a custom 3D printable case for the Waveshare GameHat available for under $40 delivered. This is an awesome bang for your buck, inexpensive little unit that will run Retropie on an IPS screen with a Raspberry Pi 3. The only short comings I found was the lack of a proper case and the joystick throw was too large. Was able to fix these issue with this nice 3D printed case and joystick restrictor. All files are included to make your own Retro gaming console.

NOTICE: Be advised the Waveshare GameHat comes with 12mm clicky tactile buttons which I did not like. I replaced them with soft silicone buttons available from Adafruit. If you don't do this mod, this case will not fit.

**Now includes updated design to accommodate changes in latest Waveshare GameHat that includes square trigger buttons and power on switch location change.  If you have bought the unit recently, print the new TopShell and BottomShell stl.  All other stl's still apply. 

Files included in download:

Topshell.stl

Bottomshell.stl

BatteryCover.stl

JoystickRing.stl

SwithchCap.stl

JoystickRestrictor.stl

12mmInsert.stl

Combined.stl

TopShellSquareButtonsV2.stl (For new case that has square trigger buttons)

BottomShellSquareButtonsV2.stl (For new case that has square trigger buttons)

This download is for personal use and not to be resold or distributed. Copyright HoolyHoo. Follow me on instagram @3DHooly